-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ATTENTION: for my "how to purchase" INFO page, please click HERE and, for send us a mail, please click HERE
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
www.luigicases.com shipping address (not a shop) : via Courmayeur 35, 00135 Roma, Italy
Luigi phone is available also through WhatsApp : +39 337 747633 (but I prefer emails...)
for any info, and figured prices, please click here : Luigi  or Massimiliano
I (usually) WORK ALWAYS, ALSO ON SATURDAY AND SUNDAY...
 
ATTENTION: for my "how to purchase" INFO page, please click HERE
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------

No credit cards, sorry, but you may use them with     
PayPal accepted,
NOW AT 5% EXTRA FEES REFUND
If you'll want to place any order, please email directly to me, to: Luigi
-------------------------------------------------------------------------------------------------- 
September 2019 -----
ATTENTION: of course, my well known "flush" SS Tripod screw is also available for my cases for
most cameras, say that I can fit (me, in person) to ANY of my cases... Optional, at Eur 60, fitted
very old picture
of a Leica M9 case
----------------------------------------------------------------------------------------------------------------------------------------------------------------------

CASES FOR LEICA Reflex
 
A MY special model (since March, 2006), half case for your vintage, superb Leicaflex SL2,
probably the VERY BEST mechanical SLR ever made by ANY makers, Euro 170

At Euro 10 extra, you may order your case for SL2 with the special RED stitching
 
SHIPPING
is NOT included ! By fast UPS/DHL, Eur 30 to most western countries, Eur 40 elsewhere


It is soft, protective, completely lined with the best suede leather,
and finally you may bring your "jewel" SL2 camera on the road without
too much risks to have it ruined by some scratches ! Of course, upon request
we can make the FULL version, too -
Euro 170 NOW without "deluxe" strap.
Black, and Natural Aged Brown (Eur 20 extra) are usually ready to ship
other colors, if requested, are gladly made within about 15 working days

The cost of my optional 15mm Deluxe strap is Euro 60 apart, if required
fast shipping, Eur 30 to most Western countries, Eur 40 elsewhere
 
Here a sample of my half case for Leica SL2" in the MOKA color
ATTENTION: for my "how to purchase" INFO page, please click HERE
-------------------------------------------------------------------------------------------------------------------
Dear visitors of this page(s), let me finally introduce "officially" my very special SS Tripod "flush" SCREW, the one that many buyers of my cases already knows... Sincerily, I am quite proud of this my idea ! Unlike former Leica cases screws, and, as far as I know, unlike ALL former cases screws, this special "Luigi's" screw still leaves the case bottom well flat, without the uncomfortable protrusion on the bottom, that prevents the case (and the camera) to rest firmly even on the most flat surfaces - His design permit to easily operate it with any thin coins, and in the lower part there is the useful TRIPOD hole, with the smaller thread, the one actually used by ALL makers.

It is quite costly, Eur 60 each (fitted), because: 1. every screw is hand made with a lathe - 2. the screw is all made in solid stainless steel, of which I am a fanatic user, being me a "boat's man"... - 3. to fit well it is a not easy job, it takes a lot of time and care, and there is always the risk to ruine a NEW case
 
ATTENTION
: the "Bottom SCREW" is not fitted in our cases by default - It will be fitted ONLY upon a clear request, and a payment for it

(click)  - For our colours samples...   Ginevra
Here, my proposal for an (half) case for your Leica R9-R8 fitted with the DMR
(we have a new DMR items available, boxed, warranty, all papers, ask...)

Of course, I will make upon buyer's request the two proper round cutouts on the
front side, for the possible setting of the existing front controls...


Please, look at the new pictures below (April 2006). Them are showing the DMR case either in
"Aged Brown", and in black. The black one comes with the command cutouts in rear, and in front sides.

Y
our Leica R9-R8 fitted with the DMR will have a serious and practical "dress"
that allows to operate all the necessary technical buttons, wheel, and screens.
Please, inspect carefully my pictures of it, and understand how difficult is this case.
black, or natural (tan) brown. Other colours upon request.
Euro 380 (20/25 days...)
without strap. The optional (identic leather) "deluxe" strap is offered at Euro 60
ATTENTION: for my "how to purchase" INFO page, please click HERE
------------------------------------------------------------------------------------------------------------------------------------

TWO R9-R8 MODELS - We still have ready for sale the two half cases for your
Leica R8 and R9 reflex cameras: a "STANDARD R8-R9" half case for the camera
and lens, only, and the "WINDER R8-R9" half case, that accomodate the
camera with a R8-R9
WINDER
(and a lens) fitted (NOT the motor )
3 NEW PICTURES below (2017) in MY Natural Aged Brown...


I try to keep this case color always ready to ship, case Eur 200, Deluxe strap Eur 60
 
SHIPPING
is NOT included ! By fast UPS/DHL, Eur 30 to most western countries, Eur 40 elsewhere



here a new, special "edges" finish in RED, made upon request at Eur 20 extra...
I will offer this special finish also to other cases models, of course



The rear cutout is made ONLY upon buyer's request, at NO extra charge.
However, I consider it not so necessary... It's up to you

HERE BELOW, 4 PICTURES OF THE BLACK HALF CASE FOR R9/R8, "normal model"


HERE BELOW, 4 PICTURES OF THE BLACK HALF CASE FOR R9/R8, "for winder-R model" (it's taller...)


HERE BELOW, 4 PICTURES OF THE BROWN HALF CASE FOR R9/R8, "normal model"

fast shipping, Eur 30 to most Western countries, Eur 40 elsewhere

HERE BELOW, 4 PICTURES OF THE BROWN HALF CASE FOR R9/R8, "for winder-R model" (it's taller...)


Those are eight pictures of the STANDARD R8-R9 half case. Please trust me,
it has been a very hard work to make it (them), being the R8-R9
cameras shape
NOT symmetrical, really a difficult job
Euro 180 without strap (that is an optional, and cost Euro 60 extra)

 
SHIPPING
is NOT included ! By fast UPS/DHL, Eur 30 to most western countries, Eur 40 elsewhere

This is the WINDER R8-R9 half case, recently pictured, where you may put
your R8-R9 camera with a WINDER (NOT a motor) fitted on it.
Euro 200 without strap (that is an optional, and cost Euro 60 extra)
 
Attention: only upon buyer's request, if you want to fit a tripod...


...for an extra Eur 60 amount, I could add a MY special Stainless Steel "flush" Tripod screw that leaves the bottom side still flat (unlike on ALL leica cases), allowing to fit the tripod to it. Here two (poor) pictures os this technical solution. My special screw may be operated with the use of a coin...
Upon a possible buyer request, and confirmed order, in about 15 working days I can make
and ship the FULL case for R8-R9, either in black or brown finish, and also (in some
more days...) in any of our other 12 available finishes ! Strap NOT included,  Eur 480
my Deluxe strap is an optional at Eur 60
fast shipping, Eur 30 to most Western countries, Eur 40 elsewhere

HERE BELOW, A CUUUTE SPECIAL CASE FOR R9/R8, BLACK, WITH THE RED BORDERS...
it's not always ready, but I will gladly make it quikly for you, in about 4 days... Eur 20 extra...





ATTENTION: for my "how to purchase" INFO page, please click HERE



    Ginevra


_______________________________________________________________
My half case for a Leica R7












We make finally also a new half case, proper for Leica R7 (and R4, R5, RE, R6, R6-2),  
Euro 140 NOW without "deluxe" strap. Black, brown, other 10 colors, please ask.
The cost of my 15mm Deluxe strap is Euro 60 apart, if required
to email me: luigi
fast shipping, Eur 30 to most Western countries, Eur 40 elsewhere
 
ATTENTION: for my "how to purchase" INFO page, please click HERE
_______________________________________________________________
We make also the half case proper for R4, R4-s, R4-2, RE, R5, and (now) for R6, too.
It has been also improved, reaching the same high quality of my actual cases for Leica M



pictures
On the (poor) pictures above, here my latest model for Leica R4, R5, R6, that fits
perfectly also when there is the black protruding small "grip" on the rear side.
 
Euro 140 NOW without "deluxe" strap.
Black, brown, other 10 colors, please ask
Some special hand done finishes, Eur 20 extra (Natural Aged, RAF Pilot...)
The cost of my 15mm Deluxe strap is Eur 60 apart, if required

(click)  - For our colours samples...   

   Very old piclures, made in the 90's... now this case has been well improved

 



...strangely, this case for R4, R5, R6 fits well also the Nikon FM-FE cameras !



...strangely, this case for R4, R5, R6 fits well also the Nikon FM-FE cameras !



  pictures
Strangely, this case model is also suitable (it fits NEARLY
perfectly) for Nikon FM, FE, FM-2, FM-2new, FM-3 cameras
Euro 140 NOW without "deluxe" strap.
Black, brown, other 10 colors, please ask
Some special hand done finishes, Eur 20 extra (Natural Aged, RAF Pilot...)
The cost of my 15mm Deluxe strap is Euro 60 apart, if required
 
SHIPPING
is NOT included ! By fast UPS, Eur 30 to most western countries, Eur 40 elsewhere

to email me: Luigi

  A small item that represents one of the "secrets" of many professional photographers...
A new very special product MADE and offered by Luigi
Please, look attentively... I am introducing the NEW two "soft shutter releases"
buttons for Leica and other cameras, 16 mm diameter for your finger's comfort.
For Bessas I am making them smaller - I know, several are offered around.
But, those two models are made in SOLID STAINLESS STEEL
TWO models: "Concave" and "Convex" - Euro 20 each, choose yours
I suggest you to purchase it/them along with a case, avoiding to pay the shipping
cost for the soft release, alone - I already placed one in EACH of my own cameras...


ATTENTION: for my "how to purchase" INFO page, please click HERE
 

However, I can't guarantee the paint duration... (NOW quite strong )

I thought to post a feedback of a kind buyer, about this item(s)

Positive feedback rating   Wonderful service. Soft release is well made. You won't believe the difference!
 
  Buyer   malewitsch ( 40Feedback score is 10 to 49)

No credit cards, sorry, but you may use them with     
PayPal accepted,
NOW AT 6% FEES REFUND
-------------------------------------------------------------------------------------------------- 
May 2022 -----
 



SOME of our MORE COSTLY items, will be shipped perfectly packed
into one of those special, robust Luigi boxes
shipping options
NOW I ship by DHL or UPS, or (seldom) by Registered Air Mail
fast shipping, Eur 30 to most Western countries, Eur 40 elsewhere
I WARMLY SUGGEST DHL or UPS -
Packing & handling included

(but there are more costly exceptions - Russia, as example...)

        ATTENTION: for my "how to purchase" INFO page, please click HERE

Shipping rules: dear (possible) buyers, although we are always using the MOST reliable shipping
ways, as Fedex, EMS, and the less costly Registered Air Mail, it must be very clear that we are
NOT responsible for any shipping risk after that we have carefully sent the sold items. Of course,
the SAFETY of our parcels, when them are on the way to reach you, is out from our control. Then,
I must enhance this WARNING: we will issue a full refund OR a 2nd similar item shipment ONLY if you
will request (and purchase) a FULLY INSURED SHIPPING, adding an extra 1% of the grand total of
your purchase, with a miminum amount of Euro 2 for low cost items. Thank you for your understanding